Call Toll Free

Pimp My Ride Gallery

  Home > Acura > Rsx 2002-2004 > Suspension > Arm Bars >

  02-05 Acura RSX (All Models) - Clear Anodized Rear Lower Arm Bar - Skunk2
02-05 Acura RSX (All Models) - Clear Anodized Rear Lower Arm Bar - Skunk2
List Price: $144.38
Our Price: $120.56
You save $23.82!

Product Code: 518-05-1860_1

Description Manufacturer Info
Product Info
Skunk2 Lower Control Arms for the EF, DA, EG, and DC2 chassis also feature adjustable sway bar mounting holes so you can fine tune the feel and balance of the rear suspension. Skunk2 Lower Control Arms for the EP3, DC5, EM, ES and YH3 chassis feature unique steel mounting plates to evenly distribute the clamping force of the Skunk2 hardware, eliminating the tendency to over stress the material and eventually loosen over time. Included in the Hardware Kit you will find a Skunk2 embossed socket and 10 point zinc plated bolts. The socket is used to remove the OEM hardware as well as install the New Skunk2 Hardware. Skunk2 Lower Control Arms may look exactly like other products on the market, but don't be fooled. Skunk2 Lower Control Arms have been engineered for maximum strength and performance. Features that Set Skunk2 Apart from the Competition Three Durable Anodized Finishes (JDM Gold, Gun Metal, and Clear CNC) CNC Machined from Forged AL-2024 Aluminum I-Beam Design for Maximum Strength and Resistance to Twisting and Bending Finite Element Analysis (FEA) for Strength and Performance Adjustable Sway Bar Mounting Holes (EF, DA, EG, DC2, and EK Chassis Only) Low Deflection Polyurethane Bushings that Act like Bearings Over 25% Lighter than Stock Special Zinc Plated Steel Mounting Plates, Hardware, and Skunk2 Tool (EP3, DC5, EM, ES and YH3 Chassis Only) ; Ideal for street and race applications, Skunk2 Rear Lower Control Arms replace your stock arms while retaining factory suspension geometry. The Skunk2 Rear Lower Control Arms are forged from aircraft quality AL2024 billet aluminum, precision CNC machined and are over 25% lighter than stock arms. Skunk2 Lower Control Arms feature adjustable sway bar mounting holes so you can fine tune the feel and balance of the rear suspension, and also feature low deflection polyurethane bushing which act as bearings for quicker response and a more positive feel. By allowing the arm to rotate freely about the bushing, Skunk2 eliminated the tearing and unseating commonly found with fixed rubber bushings. LONGER BOLTS NEEDED TO ACHIEVE GREATER STRENGTH: In order to make the aluminum are stronger than the factory arm, it is necessary to increase the cross sectional thickness of the aluminum arm in the mounting are. But this cannot be properly achieved unless a longer bolt is provided. If the cross sectional thickness was increased using the stock bolt, the thread engagement would be insufficient. MOUNTING PLATES NEEDED TO PREVENT ALUMINUM DEFORMATION: This applies to the DC5, EP3, and Element Lower Control Arms. When a steel bolt is tightened directly onto aluminum, there is a tendency for the aluminum to deform over time because of the higher point load applied to the material; in otherwords, the bolt will loosen over time as the material beneath it compresses. To prevent this from happening, Skunk2’s are utilizes a steel clamping plate that distributes the loads over a greater surface area and prevents the bolts from loosening. Again, a longer bolt is needed in order to incorporate the use of steel clamping plates. UNIQUE SHAPE: The reason Skunk2 used a design which incorporates a ‘step’ where the mounting plate transitions into the beam is to eliminate stress risers that occur with the arm. Through extensive FEA analysis, we determined that conventional ‘straight and flat’ designs are all plagued by internal stress risers. In other words, if an arm is not designed properly, stresses will concentrate in various areas of the arm. The material will begin to fail (fracture) from these highly stressed areas. The way the Skunk2 arm is shaped and tapered are all a direct result of eliminating stress risers. Any properly designed arm needs to be strong first, and pretty second. Rear suspension performance and feel is further enhanced when the Skunk2 Rear Lower Control Arm is used in conjunction with Skunk2 Rear Camber Kits, Lower Arm Bars, and Strut Tower Bars. Skunk2 Lower Control Arms are available in JDM Gold, Clear, and Hard Anodized Finishes.

Share your knowledge of this product with other customers... Be the first to write a review
(Your shopping cart is empty)
Built with Volusion